Honeywell HCM-3060 Series Owner's Manual page 8

PROLONGING THE LIFE OF THE FILTERS AND
MAINTAINING A CLEAN HUMIDIFIER
NOTE: Do not attempt to clean the Natural Cool Moisture
solutions, doing so will damage the filters.
• AgION™ prevents the surface growth and migration of mold, fungus, algae, and
bacteria. It is normal for a filter to discolor from mineral build-up. This will vary
depending on water quality.
• If a Natural Cool Moisture
soak it in a sink full of cool water for 10 minutes. DO NOT SQUEEZE OR WRING OUT THE
NATURAL COOL MOISTURE
• To prevent mineral deposits use DuraFree
time the Water Tank is refilled.
• Treat the Natural Cool Moisture
DO NOT clean the filter using any chemical solution.
• Always purchase Honeywell Brand Natural Cool Moisture
humidifier and the Natural Cool Moisture
set. Using any other filter could damage the motor or reduce the humidifier's performance.
• Be sure to empty water from the Water Tank and Base when not in use.
END-OF-THE-SEASON CARE AND STORAGE
• Follow weekly CLEANING instructions when the humidifier will not be used for at least one
week or more, or at the end of the season.
• At the end of the season, remove and throw away the filters, however SAVE the Filter
Frames. Do not store with used filters.
• Dry the humidifier completely before storing. Do not store with water inside the Base or
Water Tank.
• Pack the unit in its original carton and store in a cool, dry location.
• Before next use, remember to install new filters and clean the humidifier.
filter appears to be clogged by hard water or mineral deposits,
®
® FILTER. Always place filters back in the humidifier wet.
® Humidifier Water Softener, part no. AC817, each
® filters with care. DO NOT squeeze or wring out.
® filter are designed to function efficiently as a
® filters with any chemical
® filters as the fan motor of this