Table of Contents
Advertisement
FIELD REPLACEABLE UNIT DOCUMENTATION
TOP COVER REMOVAL
Control switch
board cable
PJ5205
LCD/FL cable
5. Disconnect the LCD/FL cable and control switch board
cable from PJ5205 and PJ103 on the system board.
6. Disconnect the SD slot cable and CD control/touchpad
cable from PJ124 and PJ114 on the system board.
7. Disconnect the speaker harness from PJ40 on the
control switch board.
8. Lift out the top cover assembly.
CD-R/W/DVD-ROM DRIVE REMOVAL
Rear bracket
2. Remove one M2x3 silver screw securing the side
bracket and lift out the bracket.
3. Remove two M2x6 brass screws securing the CD-R/W/
DVD-ROM rear bracket and separate the bracket.
Satellite
5200 Series
PJ40
Speaker
harness
PJ103
SD slot
cable
PJ124
PJ114
CD control/touchpad cable
CD-R/W/DVD-ROM drive
M2x3 silver screw
CD-R/W/DVD-ROM side bracket
TOSHIBA
Tough Enough for Today's World
TM
CD-R/W/DVD-ROM DRIVE REMOVAL
PJ106
1. Slide the CD-R/W/DVD-ROM drive to the right to
disconnect it from PJ106 on the system board.
SPEAKER(WOOFER) REMOVAL
Speaker
(woofer)
Glass tape
1. Peel off the glass tape securing the woofer harness.
2. Disconnect the woofer harness from PJ5504 on the
sound board.
3. Lift out the speaker(woofer).
CD-R/W/DV-ROM drive
PJ5504
woofer harness
Advertisement
Table of Contents
