How.to.navigate.the.ipod.menu.on.your.iphone.or.ipod; How.to.charge.your.iphone.or.ipod; How.to.listen.to.your.non-Docking.portable.device - Altec Lansing Octiv M650 User Manual

How to navigate the iPod Menu on
Your iPhone or iPod
In iPod mode, you can use the navigation keys on the remote to choose
songs from your music library and videos from your video library:
Press the "MenU" button to scroll up within a menu screen.
Press the "MenU" button to scroll down within a menu
screen.
Press the "MenU" button to go up a menu level. (On older
iPod models, pressing and holding this button will take you
back to the top-level menu. On 6th-generation iPod nano
models, this button provides no functionality.)
Press the "SeLeCT" button to make a selection within a menu.
How to Charge Your iPhone or iPod
Whenever your iPhone or iPod is docked and your Altec Lansing Octiv 650
speaker system is plugged into an AC outlet, your iPhone or iPod is
charging (until fully charged) – even if the speaker system is switched off.
10
How to Listen to Your non-docking
Portable Device
If you have a non-docking portable audio or video device, you can enjoy it
through your Altec Lansing Octiv 650 speaker system as well. Just connect
it via the AUX jack. Here's how:
1
Locate a 3.5mm stereo cable (not included).
2
Plug one end of the stereo cable into your device.
Your device should have either a headphone or LINE OUT jack for
you to plug into.
3
Plug the other end of the stereo cable into your speaker
system's AUX jack.
The AUX jack is located on the back of the speaker system.
4
Turn on your speaker system.
5
Turn on your device.
6
Find your desired song or video.
7
Start playing the song or video.
8
Adjust the volume.
AUX