Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Huacam HCV822
Summary of Contents for Huacam HCV822
- Page 1 HUACAM, Inc. HCV822 User Manual www.huacam.com www.huacam.com...
-
Page 2: Table Of Contents
5.10 Software Upgrade via TTFP, HTTP or HTTPS ............34 5.11 Instructions for local firmware upgrade using TFTP server........35 5.12 Configuration File Download ..................35 Restore factory default setting ....................36 Factory reset....................... 36 Ip surveilance FAQ......................... 37 www.huacam.com... -
Page 3: Welcome
1. Welcome Thank you for purchasing Huacam’s HCV822Outdoor Day/Night High Definition IP Camera, an innovative powerful weatherproof infrared next generation network camera. Its advanced ISP (Image Sensor Processor) powered with state-of-the-art auto-exposure auto-white-balance algorithm and a high quality lens, ensures high fidelity video quality that matches digital still camera color grade in a wide range of light environments. -
Page 4: Safety Compliances
A few parts (e.g. electrolytic capacitor) of the equipment shall be replaced regularly according to their average life time. The average life time varies from the differences between operating environments and usage history. Regular maintenance checks are recommended for all users. Please contact your dealer for more details. www.huacam.com... -
Page 5: Warranty
If you purchased your HCV822from a reseller, please contact the company where you purchased the device for replacement, repair or refund. If you purchased the product directly from Huacam, please contact your Huacam Sales and Service Representative for a RMA (Return Materials Authorization) number before you return the product. -
Page 6: Product Overview
2. Product overview 2.1 HCV822Camera NETWORK : 10/100 Switch LAN port for connecting to Ethernet. LINE IN: 3.5mm Audio LINE IN(Write) LINE OUT: 3.5mm LINE OUT(Green) DC 12V : 12V DC power jack; www.huacam.com... -
Page 7: Hcv822Specifications
2.2 HCV822Specifications Model HCV822 Video Compression H.264, MJPEG Image Sensor Resolution 1/3”, 2 Megapixel CMOS, 1920H x 1080V Image Sensor Sensitivity Day & night mode, exceptionally low noise levels and low-light sensitivity. Shutter: 1/10000 – 1/30 second Focal Length 2.8mm Aperture F1.8... -
Page 8: Installation Guide
The HCV822has embedded Web server to respond to HTTP GET/POST requests. Embedded HTML pages allow user to configure the IP camera through Microsoft Internet Explorer (7.0 or above, 32-bit only) or Firefox (plug-in from Huacam required). • Download Active-X Control for IE(32bit) from Huacam website: http://www.huacam.com/index.php?option=com_jdownloads&Itemid=103&view=finish&cid=13&c... - Page 9 Microsoft Internet Explorer 64 -bit support is pending. Please temporarily disable Antivirus or Internet Security Software when download and install the Huacam Firefox plug-in for video or “GSViewerX.cab” for Microsoft Internet Explorer. Connect the Camera to network with DHCP server (Recommended) The HCV822by default enabled as DHCP client, it will automatically get IP address from the network with DHCP server running.
- Page 10 9. In step 6, IE will indicate that “This website wants to install the following add-on: HCViewerX.cab from Huacam Networks Inc.”, allow the installation. 10. Firefox user need to download and install the plug-in to see the video, the plug-in for Firefox is here: http://www.huacam.com/index.php?option=com_jdownloads&Itemid=103&view=finish&cid=5&cat...
- Page 11 NOTE: Please temporarily disable Antivirus or Internet Security Software when download and install the Huacam Firefox plug-in for video or “HCViewerX.cab” for Microsoft Internet Explorer. Connect to the Camera using Static IP If no DHCP server in the network, or the camera does not get IP from DHCP server, user can connect the camera to a computer directly, using static IP to configure the camera.
-
Page 12: Hcv822Home Web Page
NOTE: Please temporarily disable Antivirus or Internet Security Software when download and install the Huacam Firefox plug-in for video or “GSViewerX.cab” for Microsoft Internet Explorer. HCV822Home Web Page The Home Page of HCV822shown as Figure 1: www.huacam.com... - Page 13 Figure 1: Home Page of HCV822 1. Control Console: PTZ Console controller for ePTZ function. 2. ZOOM: Zoom in or Zoom out during ePTZ operation. 3. FOCUS: Adjust the focus of image (Not Applicable to HCV802). 4. PTZ SPEED/Default Button: Adjust the rotate speed of the control console (Not Applicable);...
-
Page 14: Hcv822Configuration & Language Page
Chapter. • When click the “Language” tab, supported languages will be displayed in Figure 2. Click to select the related webpage display language. Figure 2: Web Language Switch • Currently firmware only support: English (default), Simplified Chinese and Russian. www.huacam.com... -
Page 15: Basic Settings Explanation
Synchronize with Local Computer: Synchronize time with local computer Set the Time Manually: Manually input the time Keep Current D/T: Select to use camera current displayed time OSD Date Format: Pull down to select date format displayed on video screen www.huacam.com... -
Page 16: Video & Audio Setting Page
Networking button has to be clicked to save all the changes made to the device. 4.2. Video & Audio Setting Page This page allows user to configure the video and audio related settings. Figure 4-1: Video & Audio Settings Page Display time stamp and text on the video screen. On Screen Display (OSD): www.huacam.com... - Page 17 • Microphone Volume • Speaker Volume: Slide to adjust the built-in speaker volume. Power Frequency: Select correct local power frequency to avoid video flicking effect under fluorescence light condition. Default is Outdoor. Figure 4-2: Video & Audio Settings Page www.huacam.com...
-
Page 18: Cmos Settings Page
If MJPEG selected, reduce max. frame rate to min. value to save bandwidth and get better image Huacam IP Camera provides two video streams, user can use them with flexibility. For example, the high-resolution stream for local recording; another low or high resolution for remote monitoring;... -
Page 19: Networking Setting Page
• Color Mode: Camera Color Mode. There are three options: Color; Black/White; Auto. NOTE: Auto option recommended for Shutter Speed, IR CUT Setting and Color Mode. 4.4. Networking Setting Page This page allows user to configure network related parameters: www.huacam.com... - Page 20 If camera behind SOHO router with port forwarding configuration for remote access, static IP or static DHCP has to be used to avoid IP address change after router reboot. TCP port above 5000 suggested if port forwarding HTTP remote access, due to some ISP www.huacam.com...
-
Page 21: Ddns Settings Page
Figure 7: DDNS Setting Page • DDNS Active: Enable DDNS by check this field. • DDNS ISP Type: Select the DDSN service provider from the pull-down menu list • Self-Define DDNS Address: Input the self-defined DDNS address • Site Name: DDNS site name www.huacam.com... -
Page 22: Sip Setting Page
This page allows user to configure SIP related parameters. HCV822can be configured as SIP endpoint to call out when alarm trigged; or allow permitted number to call in to check the video if Huacam video IP phone is used. www.huacam.com... - Page 23 • SIP User ID: SIP username, or telephone number from ITSP • Authenticate ID: Authenticate ID used by SIP proxy • Authenticate Password: Authenticate password used by SIP proxy • STUN Server: STUN server used to resolve NAT if have www.huacam.com...
- Page 24 • Enable White List Number Filter: Check to allow only white list number to call in, for security • Enable Dual-way Audio Warning: Check to enable two-way audio warning. • Phone List/Phone Number: Callee or call receiver number when alarm call trigged. • White List/Phone Number: Phone numbers allowed to call into the camera. www.huacam.com...
-
Page 25: Status Page
4.7. Status Page This page shows the HCV822operation status: Figure 9: Status Page NOTE: When SIP account registered, the status will display “Online” in Green. When SIP account unregistered, the status will display “Offline” in Red, as below. www.huacam.com... -
Page 26: Advanced Settings Explanation
Re-enter the new password for verification • Privilege: Choose user privilege • Allow Anonymous Viewing: When checked, no security enhanced. Any person can view the camera if knowing the IP or FQDN of the camera, but can NOT change anything, just view ONLY. www.huacam.com... -
Page 27: Maintenance Page
Server path holding the configuration file (auto provisioning) • XML ConfigFile Password: Password for encrypt the XML based configuration file • Automatic Upgrade Interval (Minutes): Time interval for automatic upgrade, default 10080 • Automatic Upgrade: Checked to enable automatic firmware upgrade and provisioning. www.huacam.com... -
Page 28: Smtp Setting Page (Email Alarm)
Port number used by server to send email • From Email address: The email address of alarm email sending from, usually client email ID • To E-Mail address: The email address to receive the alarmed email, total 3 included. www.huacam.com... -
Page 29: Ftp Settings Page (Upload Alarm)
Click “Test” after configuration, if setting is correct, a test email will send out and “Test successful!” yellow bar will display like below 5.4 FTP Settings Page (Upload Alarm) This page allows user to configure FTP parameters to upload the alarm or video recording:: Figure 13: FTP Setting Page www.huacam.com... -
Page 30: Alarm Server Settings Page (Upload Alarm To Supported Vms Or Http Server)
“Test successful!” yellow bar will display if the operation is successful. 5.5 Alarm Server Settings Page (Upload Alarm to supported VMS or HTTP Server) This page allows user to configure alarm HTTP server to upload alarms: Figure 14: Alarm HTTP Server Setting Page www.huacam.com... -
Page 31: Motion Detection Configuration Page (Set Alarm)
User ID from that Server • Password: Password for that User ID NOTE: Huacam provide HTTP API to help 3 party company by using HTTP server or VMS to develop further solutions for its customers. Huacam IP Camera are ONVIF certified. - Page 32 • Upload to Alarm HTTP Server When checked, the alarm will be sent to Alarm HTT Server. Party Server also can be used via HC HTTP API NOTE: Huacam free HC_Surf VMS software can be downloaded here: http://www.huacam.com/index.php?option=com_jdownloads&Itemid=103&view=finish&cid=4&cati • Email and FTP upload JPEG: When checked, a snapshot of trigger moment will be generated and be emailed to pre-configured email account, also upload to FTP server if configured.
-
Page 33: Motion Detection Time Schedule
As shown in Figure 15-2, user can configure the Motion Detection Region with related Start and Stop time to control the motion detection operation. 5.8 Syslog Settings Page (Troubleshooting) This page allows user to enable the Syslog to help troubleshooting problems: Figure 16: Alarm Server Setting Page www.huacam.com... -
Page 34: Software Upgrade
Software upgrade can be done via either TFTP, HTTP or HTTPS. The corresponding configuration settings are in the ADVANCED SETTINGS configuration page. 5.10 Software Upgrade via TTFP, HTTP or HTTPS This page allows user to configure firmware upgrade: Figure 17: Firmware Upgrade and Provisioning www.huacam.com... -
Page 35: Instructions For Local Firmware Upgrade Using Tftp Server
Microsoft IIS web server. 5.12 Configuration File Download Huacam SIP Device can be configured via Web Interface as well as via Configuration File through TFTP or HTTP/HTTPS. “Config Server Path” is the TFTP or HTTP/HTTPS server path for configuration file. It needs to be set to a valid URL, either in FQDN or IP address format. The “Config Server Path”... -
Page 36: Restore Factory Default Setting
Restoring the Factory Default Setting will DELETE all configuration information of the camera. Please BACKUP or PRINT out all the settings before approach to following steps. Huacam will not take any responsibility if you lose all the parameters of setting or cannot connect to your VoIP service provider. -
Page 37: Ip Surveilance Faq
Secondary Stream on the pop-up menu. Try reinstalling the Huacam Viewer add-on for IE if you cannot see the video stream. What is DDNS? Is it important for IP surveillance product to have DDNS support? - Page 38 Make sure that the RTSP port of the device is set to 2000 plus the HTTP Port number. For example, if the HTTP port is 88, then the RTSP port of the device that you configured on HC_Surf or mobile phone should be 2088. www.huacam.com...
- Page 39 RTSP port number changes according to the web port. If the web port is 80, then the RTSP port is 554. If the web port is not 80, then the RTSP port equals the web port +2000. For example, if the web port is 88, then the RTSP port will be 2088. www.huacam.com...
- Page 40 HUACAM Shenzhen Huacam Technology Co., Ltd Tel (+86)0755-28178617 Web www.huacam.com Support: support@huacam.com Sales: sales@huacam.com www.huacam.com...
Need help?
Do you have a question about the HCV822 and is the answer not in the manual?
Questions and answers