Optical Drive (Select Models Only) - HP 430 Maintenance And Service Manual

Optical drive (select models only)

NOTE: The optical drive spare part kit includes a bezel and bracket.
Description
Blu-ray Disc ROM with SuperMulti DVD±R/RW Double-Layer Drive with LightScribe
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the memory module/wireless module compartment cover (see
on page
6. Remove the hard drive compartment cover (see
Remove the optical drive:
1. Remove the Phillips PM2.5×6.0 screw (1) that secures the optical drive to the computer.
2. Insert an unbent paper clip or similar thin tool into the optical drive tab access (2) to release
the optical drive tray from the optical drive.
3. Remove the optical drive (3) by sliding it out of the optical drive bay.
Battery on page
44).
43).
Hard drive on page
Component replacement procedures
Spare part number
645989-001
645988-001
WLAN module
48).
51