Advertisement
ENFORCER 100F Owner's Manual
VALET
Sometimes you may not wish your alarm to
arm when you leave your vehicle. (For
instance, if you leave your car with a valet
attendant, you may not want to teach him
how the alarm operates.). If your alarm is
set for active (manual) arming, this is easy —
don't press button #1, and the alarm will not
arm. However, if your alarm is set to arm
passively, use the valet mode to prevent it
from arming.
To enter valet, first disarm the alarm, close all
doors, turn the ignition ON, and press and
release the VET button once. The alarm is
now in the valet mode. The siren chirps once
to confirm.
To exit valet, close all doors, turn the ignition
EMERGENCY DISARM
If you lose your transmitter, you can disarm
your alarm with the ignition key and "VET"
button. While your alarm is either armed or
triggered, turn the ignition switch ON, then
press and release the VET button once. The
siren and the flashing lights stop, and the
alarm is disarmed. (Ask your dealer where
the VET button is hidden.)
CHIRP DELETE (Silent arm/disarm)
There are times, especially at night, when
you may not want to hear the siren chirps.
There are 2 ways to delete chirps:
A. One-time delete — Just press button
#2 any time before you need the chirps
deleted. For instance, press button #2
before you press button #1 to arm or
disarm the alarm, and the chirps will not
sound, but the parking lights will still
flash. The chirps are restored the next
time you press a transmitter button.
B. Permanent delete — Your dealer can
Page 6
ON, and press and release the VET button once.
The siren chirps twice to confirm valet is exited
and that the alarm is now disarmed.
While your alarm is in valet, the LED flashes
slowly when the ignition switch is OFF so thieves
think the alarm is armed. It does not flash when
the ignition switch is ON. If you press
transmitter button #1 while the alarm is in valet,
the doors will lock or unlock, and the parking
lights will flash four times. The alarm's
emergency call for help (panic) operates
normally.
NOTE — If you trigger the alarm by doing
emergency call for help (panic) while the alarm
is in valet, the alarm will exit valet.
NOTE — If you use emergency
disarm, just turn the ignition OFF
and close the doors when you leave
your car, and the alarm arms automatically.
Next time you open a door, you will have 10
seconds of quiet to turn the ignition switch ON
and press the VET button to disarm the alarm.
This feature is cancelled next time you use your
transmitter to arm or disarm your alarm.
→
→
→
→
program your alarm to delete the chirps on
a permanent basis.
NOTE — Either method deletes the arm,
disarm, pre-intrusion, zone bypass, and valet
chirps. However, it does not affect the flashing
parking lights.
SECO-LARM U.S.A., Inc.
TABLE OF CONTENTS
Transmitter Functions ...................... 3
Total Protection ............................... 3
Arming .......................................... 4
Armed ........................................... 5
Zone Bypass ................................... 5
Disarming ...................................... 5
Emergency Call for Help (Panic) ...... 5
Valet .............................................. 6
Emergency Disarm ......................... 6
TRANSMITTER FUNCTIONS
1. Press transmitter button #1 to:
Arm and disarm the alarm.
Turn the siren ON (and shut it OFF) in
an emergency.
Lock/unlock power door locks.
Bypass an open zone.
2. Press transmitter button #2 to:
Silently arm or disarm the alarm.
Operate 2nd vehicle.
Bypass the alarm sensor's pre-intrusion
function.
These features and functions are explained in
this Owner's Manual.
TOTAL PROTECTION
While your alarm is armed, your car is
protected in the following ways:
Potential thieves or vandals will be deterred
by the flashing LED.
If a thief opens a door, the alarm
immediately sounds the siren and flashes
the parking lights for 30 seconds. If the
opened door is not closed and current
sensing has not been selected, the siren
and lights will trigger up to four 30-second
cycles, after which the alarm will rearm.
Turning the ignition key ON will trigger the
alarm for 30 seconds.
The starter disable prevents the car from
ENFORCER 100F Owner's Manual
Chirp Delete (Silent arm/disarm) ..... 6
Power Door Locks ........................... 7
Dual-stage Shock Sensor ................ 7
Other Features ............................... 7
Optional Accessories ...................... 7
Appendix 1 — Understanding the
Siren Chirps & Light Flashes ......... 8
Appendix 2 — Understanding the
LED flashes ................................. 8
Button #1
Button #2
being started.
If the shock sensor detects light taps on the
car, it will trigger the pre-intrusion alert (the
siren chirps five times and the parking
lights flash five times) to warn potential
thieves and vandals. However, if it detects
a strong shock to the car, such as shock
caused by prying the trunk open, it will
trigger the alarm for 30 seconds. (See
DUAL-STAGE SHOCK SENSOR, page 7)
Optional SECO-LARM shock, motion,
glass-break, and microwave sensors will
offer your alarm additional protection. Ask
your SECO-LARM dealer.
Page 3
Advertisement
