Operation - Wel-Bilt 21404 Owner's Manual

Attaching the auxiliary handle
1. The auxiliary handle provides additional control, support and guidance for the drill.
2. The auxiliary handle can be set to any position around the 360ºhandle collar mount.
3. Loosen the auxiliary handle grip by rotating it anti-clockwise to the handle collar.
4. Slide the collar of the auxiliary handle over the chuck and onto the auxiliary handle collar mount
of the drill. Fig A
5. Secure the auxiliary handle by turning the auxiliary handle grip clockwise. Fig B
Adjusting the depth rod
1. Loosen the auxiliary handle by turning it anti-clockwise.
2. Adjust the depth rod so that the drill bit extends beyond the end of the rod to the required drilling
depth. Fig C
3. Lock the depth rod in position by turning the auxiliary handle clockwise.

OPERATION:

It is important to understand the functions of the various controls. Please see below how and when
to use the on/off switch, speed control, speed pre-selector, forward/reverse control and drill/hammer
selector.
Familiarize yourself with these controls before first use of your new drill.
On/off switch
1. Turn the drill on by depressing the trigger switch. To turn the tool off, release the trigger
switch. Fig D
Page of 10 5