Program Play - Panasonic RX-DU10 Operating Instructions Manual

MP3 CD directory sample:
Play order: song01vsong02v... song14
MP3 CD
Folder number F01 There is no MP3 file.
F01 albumF01
song01.mp3
song02.mp3
song03.mp3
song04.mp3
song05.mp3
F02 albumF02
song06.mp3
song07.mp3
song08.mp3
song09.mp3
song10.mp3
F03 albumF03
song11.mp3
song12.mp3
Note:
• The CD-R/RW that has no music data or non-
MP3 fi les cannot be played back.
• Do not make an empty folder. It may not work
correctly.
• In this model, recommend recording setting is
128 kbps of fi xing bit rate. If fi les are recorded
in other bit rate (for example: 320 kbps) or in
variable bit rate, track-jump may sometimes
happen according to recording conditions.
Basic play
1
Load the MP3 CD.
(xP.7 Step1 to Step4)
2
Press [i PLAY/PAUSE] to start play.
3
Press [PROGRAM/FOLDER].
While "FOLDER" blinks on the display,
press [e] or [f] to select the folder.
4
When the fi le number appears, press [e]
or [f] to select a file.
5
Press [n STOP] to stop the play.
Note:
• If there is no music data, "no" appears.
• Only select the folder in playing mode.
The unit skips it.
douc01.doc
photo01.jpg
F04 albumF04
song13.mp3
song14.mp3

Program play

Up to 20 tracks on a disc can be programmed
for play in any order.
• Before programming procedure, set function
switch to [CD/USB] fi rst.
• The same track can be programmed more than
once.
[CD][MP3]
1
Press [n STOP].
2
Press [PROGRAM/FOLDER].
"PROGRAM" blinks on the display.
3
Press [e] or [f] to select desired
track.
4
Press [PROGRAM/FOLDER].
Repeat steps 3 - 4 to program additional
tracks.
5
Press [i PLAY/PAUSE] to start play.
• Any attempt to program more than 20 tracks
will result in "FUL" appears.
• To cancel program play, press [n STOP]
in stop mode.
Checking the program
Press [PROGRAM/FOLDER] repeatedly when
"PROGRAM" remains lit in stop mode.
Adding to the program
1
In stop mode, press [PROGRAM/FOLDER]
repeatedly until "00" is displayed.
2
Select a track as explained above.
3
Press [PROGRAM/FOLDER].
Changing a track
1
In stop mode, press [PROGRAM/FOLDER]
repeatedly until the program number to
be replaced is displayed.
2
Select a desired track as explained
above.
3
Press [PROGRAM/FOLDER].
Note:
Programmed details cannot be partially de-
leted or inserted.
9