Caution For Ac Mains Lead - Panasonic RX-DU10 Operating Instructions Manual

Caution for AC mains lead

(When using the moulded three pin
mains plug)
For your safety, please read the following text
carefully.
This appliance is supplied with a moulded
three pin mains plug for your safety and con-
venience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please
ensure that the replacement fuse has a rating
of 5-ampere and that it is approved by ASTA
or BSI to BS1362.
Check for the ASTA mark
on the body of the fuse.
If the plug contains a removable fuse cover
you must ensure that it is refitted when the
fuse is replaced.
If you lose the fuse cover the plug must not be
used until a replacement cover is obtained.
A replacement fuse cover can be purchased
from your local dealer.
CLASS 1
LASER PRODUCT
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the
type of AC mains plug(figures A and B). Con-
firm the AC mains plug fitted and follow the in-
structions below.
Illustrations may differ from actual AC mains
plug.
1. Open the fuse cover with a screwdriver.
or the BSI mark
Figure A
2. Replace the fuse and close or attach the
fuse cover.
Figure A
Fuse
(5 ampere)
Figure B
Fuse cover
Fuse
Figure B
(5 ampere)
3