Install The Car Audio - Philips CEM2090 User Manual

/
i
• Press and hold to turn on or off
Maximizing volume.
• In any mode, press to view clock.
j DBB/AS
• Press turn on or off Dynamic Bass
Boost (DBB) sound.
• In radio mode, press and hold to
access to tuner auto store.
k
• Select preset radio station No.5/6.
• Start play.
• Pause or resume play.
l REP / SHUF
• Select preset radio station No.3/4.
• Access to repeat play.
• Access to shuffle play.
/
m
• Select preset radio station No.1/2.
• Search for track/folder.
/
n
• Tune for radio station.
• Skip/search for track.
• Fast backward/forward playback.
o DISP
• Display current status.
• Select the dimmer high or low.
p EQ / AUDIO
• Select equalizer (EQ) setting.
• Access audio setting menu.
q
• Unlock the panel.
r BAND
• Select tuner band.
s RESET
• Restore default settings.
t Disc slot
6 EN
3 Install the car
audio
These instructions are for a typical installation.
However, if your car has different requirements,
make the corresponding adjustment. If you have
any questions regarding installation kits, consult
your Philips car audio dealer.
Caution
•
This unit is designed for negative ground (earth) 12 V
DC operation only.
•
Always install this unit in the car dashboard. Other
locations can be dangerous as the rear of the unit heats
up during use.
•
To avoid short-circuit: before you connect, ensure that
the ignition is off.
•
Ensure that you connect the yellow and red power
supply leads after all other leads are connected.
•
Ensure that all loose leads are insulated with electrical
tape.
•
Ensure that the leads do not get caught under screws
orin parts that will move (e.g. seat rail).
•
Ensure that all ground (earth) leads are run to a
common ground (earth) point.
•
Use only the supplied mounting hardware for a safe
and secure installation.
•
Improper fuses can cause damage or fire. When you
need to change the fuse, consult a professional.
Note on the power supply lead (yellow)
• When you connect other devices to this
apparatus, ensure that the rating of the car
circuit is higher than the total fuse value of
all the connected devices.
Notes on speaker connection
• Never connect speaker wires to the metal
body or chassis of the car.
• Never connect speaker wires with stripes
to one another.