Feature Settings - Philips 20HFL2809D/12 Installation Manual

Feature settings

[Multi RC]
Enter the MultiRC Menu Feature to configure the remote control to work with one TV. To enter the MultiRC Menu
on TV press the key sequence: MENU, RETURN, 1,2,3,4. On the TV a menu will guide you to select the desired TV
configuration. Choose a number between 1 and 4 to assign to the TV. Afterwards configure the remote control for
the same number as the TV by keeping MENU (HOME)+ the Digit pressed for 5 seconds.
The HFL2809 supports a maximum value of four remotes. The default value is Remote 1.
Remote 1: Press MENU (Home) + 1 (for 5 seconds).
Remote 2: Press MENU (Home) + 2 (for 5 seconds).
Remote 3: Press MENU (Home) + 3 (for 5 seconds).
Remote 4: Press MENU (Home) + 4 (for 5 seconds).
Example: TV is configured for Multi RC 2.
Remote control: Press MENU (Home) + 2 (for 5 seconds).
!!Note: Before disabling the Hotel TV for any reason, reset the multi RC to default. The reset procedure is explained
below.
Enter the MultiRC Menu Feature to reset the MultiRC feature for the TV or for the remote control.
To enter the MultiRC Menu:
• Press key sequence: MENU, RETURN, 4,3,2,1
On the TV you will see a dialog, "Reset OK?" Press the OK key to reset the system. After resetting, the system will
return to the factory default.
To reset the remote control to default value press MENU + 1 (for 5 seconds).
28