Nyne Home Audio NH-5000 User Manual page 16

1
Press on the remote control
(or tap on the top panel
repeatedly) to enter Bluetooth
mode.
☞
The power/status indicator fl ashes
blue.
☞
The indicator on the top panel
lights up and starts to fl ash.
☞
The speaker enters pairing mode
automatically.
2
Enable the Bluetooth function on
your device to be paired with
NH-5000.
☞
The device to be paired with NH-5000
enters Bluetooth searching mode.
☞
After a while, "NYNE NH-5000" is
displayed in the list of Bluetooth
equipment on the device to be
paired with NH-5000.
3
Select "NYNE NH-5000"on the
device to be paired with NH-5000
to start pairing (if required, enter the
password "0000").
☞
After successful pairing and
connection, the
top panel stops fl ashing and the
power/status indicator turns to blue
steadily.
Tip:
•
After successful pairing and fi rst-
time connection, if your paired
device fails to connect with NH-5000
automatically the next time, you may
need to select the device name of
NH-5000 from the list of Bluetooth
equipment on your paired device to
set up Bluetooth connection again.
16 EN
Play music from a Bluetooth connected device
indicator on the
Start music play on your device paired
and connected with NH-5000.
During music play, you can:
•
•
Notes:
•
To play/control music wirelessly
through the Bluetooth docking
speaker, make sure that your
device paired with NH-5000 is
compatible with Bluetooth profi les
A2DP/AVRCP. Check the user
manual of your paired device for
details.
•
Make sure that Bluetooth
connection has been set up
between the paired device and
NH-5000.
☞ You can hear music streamed
to the Bluetooth docking
speaker.
Press on the remote
control to skip to the previous/next
song.
Press on the remote control to
pause or resume music play.