Panasonic KX-TGH260 Quick Manual page 4

Link to cell
Pairing a Bluetooth cellular phone
1
Handset:
For CELL 1: {MENU} (right soft key) (6241
For CELL 2: {MENU} (right soft key) (6242
L After the corresponding CELL indicator on the base unit starts flashing, the rest of the
procedure must be completed within 5 minutes.
2
Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular
phone to enter the pairing mode.
L Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default:
"0000"). If your cellular phone shows PassKey confirmation on its display, follow the
directions to proceed.
3
Handset:
Wait until a long beep sounds.
L It may take more than 10 seconds to complete pairing.
L When the corresponding CELL indicator lights up, the cellular phone is connected to the
base unit. You are ready to make cellular calls.
4
{OFF}
Note:
L Make sure that your cellular phone is set to connect to this product automatically. Refer to your
cellular phone's operating instructions.
Base unit: CELL indicators
Status
On
Flashing
Flashing rapidly
Light off
Handset: Link to cell display items
A cellular line is in use.
L When flashing: The cellular call is put on hold.
L When flashing rapidly: A cellular call is being received.
*1 Corresponding cellular line(s) is(are) indicated next to the item.
A cellular phone is connected.
L When turned off: A cellular phone is not connected to the base unit.
*1 Corresponding cellular line(s) is(are) indicated next to the item.
− A cellular call is being done on that line.
uv
− The cellular line is selected for the setting.
Meaning
A cellular phone is connected. Ready to make/receive cellular
calls.
− The cellular line is in use.
− Phonebook entries are being copied from a cellular phone.
− The base unit is searching for the paired cellular phone.
− The base unit is pairing a cellular phone.
− A cellular call is put on hold.
A cellular call is being received.
− A cellular phone is not paired to the base unit.
− A cellular phone is not connected to the base unit.
*1
*1
Ready to make/receive cellular calls.
– 4 –