CPU Type Configuration
This section shows you how to configure your CPU step by step. Note
that you need to check the CPU voltage before installation. This
mainboard supports 75MHz host bus frequency for Cyrix CPUs. Beware
that 75MHz host bus frequency is over the specification of this chipset.
Therefore, you have to use high quality devices to meet the standard of
these CPUs, i.e., high quality DRAM and VGA card.
Step 1: Frequency Setting
Pentium – 90/100 CPU Settings (1.5 x clock)
AMD K5 – PR90/PR100/PR120/PR133 (1.5 x clock)
Pentium – 75/50 MHz
AMD K5 – PR 75/50MHz
ON
12345
SW1
Pentium – 90/60 MHz
AMD K5 – PR 90/60MHz
AMD K5 – PR 120/60 MHz
ON
12345
SW1
Pentium – 100/66 MHz
AMD K5 – PR 100/66 MHz
AMD K5 – PR 133/66 MHz
ON
12345
SW1
Figure 2Ð1Ð1. CPU Jumper Settings
Note: 1.
You must equip the CPU with a fan and heat sink for system
stability.
2.
AMD K5ÐPR90= AMD 5 k 86(SSA5)ÐP90.
82371AB
P.B. SRAM
64K x 32
586 CPU
Family
P.B. SRAM
64K x 32