Heat Exchanger; Front Panel; Cleaning - Mitsubishi Electric MSZ-GE60VAD Operating Instructions Manual

C
LEANING
Instructions:
• Switch off the power supply or turn off the breaker before cleaning.
• Be careful not to touch the metal parts with your hands.
• Do not use benzine, thinner, polishing powder, or insecticide.
Air filter (Nano platinum filter)
Clean every 2 weeks
•
• Remove dirt by a vacuum cleaner, or rinse with water.
• After washing with water, dry it well in shade.
What is "Nano platinum filter" ?
Nano platinum is a ceramic particle that includes a platinum nanoparticle.
The particles are incorporated into the filter material, which results in pro-
viding semi-permanent antibacterial and deodorizing characteristics for the
filter. Nano platinum surpasses the catechin (a bioflavonoid that is found
in green tea) in performance. Nano platinum filter uses this compound not
only to improve air quality but also to eliminate bacteria and viruses. This air
filter has a semi-permanent lasting effect even after washing it with water.

Front panel

Hinge
Hole
Air outlet and Fan (before cleaning, make sure that the fan is stopped)
1
Turn the horizontal vanes down-
ward. Then, remove the upper
vane as shown in ➀ and ➁.
• Repeat ➀ and ➁ for the lower vane.
Unlock
Upper vane
4
Put the vertical vanes back to their
original positions correctly one by
one, into their respective guide.
• Push the vanes until they click into place.
Guide (catch)
• Use only diluted mild detergents.
• Do not expose parts to direct sunlight, heat, or fire to dry.
• Do not use water hotter than 50°C.

Heat exchanger

• Wear gloves to protect your hands.
• Use the QUICk CLEAN kIT
(option).
Parts Number MAC-093SS-E
• Refer to the instructions described in the
QUICk CLEAN kIT for details.
Air cleaning filter
(Electrostatic anti-allergy enzyme filter)
Every 3 months:
• Remove dirt by a vacuum cleaner.
When dirt cannot be removed by vacuum cleaning:
• Soak the filter and its frame in lukewarm water before rinsing it.
• After washing, dry it well in shade.
Every year:
• Replace it with a new air cleaning filter for best performance.
• Parts Number
• Clean the filters regularly for best performance and to
reduce power consumption.
• Dirty filters cause condensation in the air conditioner
which will contribute to the growth of fungi such as
mold. It is therefore recommended to clean air filters
every 2 weeks.
1. Lift the front panel until a "click" is heard.
2. Hold the hinges and pull to remove as shown in the left illustration.
• Wipe with a soft dry cloth or rinse it with water.
• Do not soak it in water for more than two hours.
• Dry it well in shade.
3. Install the front panel by following the removal procedure in reverse. Close the
front panel securely and press the positions indicated by the arrows.
2
Swing out the two vertical vanes
one by one.
5
Install the horizontal vanes by
following the removal procedure
in reverse.
• If the horizontal vanes are not installed
correctly, all LED lamps blink when power
is turned on.
MAC-2310FT
Important
3
Clean the air outlet and fan.
• Wipe with a soft dry cloth.
Clean the fan.
• Use the QUICk CLEAN kIT (option).
Parts Number MAC-093SS-E
• Refer to the instructions described in the
QUICk CLEAN kIT for details.
Note:
Do not apply excessive force to the fan or fan guard.
En-