IBM 110 GB SDLT User Manual page 12

Step 3. Setting the SCSI ID, termination and parity
Before opening the static-protective bag containing the tape drive, touch the
bag to an unpainted metal surface on the computer for at least two seconds.
Remove the drive from the static-protective bag. If you must put the drive
down, place the drive on the static-protective bag. Do not touch any exposed
components of the tape drive. Instead, handle it carefully by the edges.
Use the illustration on the following page to locate the SCSI configuration
jumper blocks.
1-4
110/220 GB SDLT Internal Tape Drive: User's Guide