Engine Oil - Polaris 120 PRO R 2013 Owner's Manual

Maintenance

Engine Oil

Oil Recommendations
POLARIS recommends the use of Performance Synthetic 4-Stroke oil
(PS-4 or PS-4 Plus) for this engine. PS-4 has been specially formulated
for use in POLARIS 4-cycle snowmobile engines. It's a fully synthetic,
high performance, multi-viscosity oil designed to provide the ultimate in
lubrication performance and protection.
Always check and change the oil at the intervals outlined in the Periodic
Maintenance Chart beginning on page 50. Perform the break-in oil
change after 20 hours of operation. Always change the oil any time it's
contaminated with water, fuel or debris.
NOTICE: Mixing brands or using a non-recommended oil may cause serious
engine damage. Always use the recommended oil. Never substitute or
mix oil brands.
Oil Level
Maintain the oil level between the upper and lower marks on the dip-
stick.
1. Position the vehicle on a level
surface.
2. Stop the engine.
3. Remove the dipstick and wipe
it dry with a clean shop towel.
4. Insert the dipstick into the oil
fill hole completely, but do
not thread it.
5. Remove the dipstick and view
the oil level.
6. If the oil level is below the
lower mark on the dipstick,
add the recommended oil to
the upper mark.
ADULT SECTION
Safe
Range
Upper
Mark
Lower
Mark
Dipstick
61