Appendix C. Portable And Mobile Computer Activation - IBM IL1210 User Manual

Appendix C. Portable and mobile computer activation

Many mobile computers do not automatically turn on their external video
port when a projector is connected. Activation commands for some mobile
computers are listed in the following table. (If your computer is not listed or
the given command does not work, refer to the computer documentation for
the appropriate command.) On many mobile computers, the activation
function key is labeled CRT/LCD or with an icon such as:
Note: Visit http://www.infocus.com/ for the most current activation chart. It
Note: Usually, pressing the key commands once activates the external video
Computer
Acer
AST* **
AMS
AMT
AT&T
Advanced Logic Research
Altima
Ambra**
Amrel* **
© Copyright IBM Corp. 2001
is located in the Service and Support link.
port, pressing it again activates both external and internal ports, and
pressing it a third time activates the internal port. Refer to your
computer documentation for details on your specific model.
Key command to
activate port
Ctrl+Alt+Esc (for setup)
FN+D or Ctrl+D
Ctrl+FN+D
FN+F5
type from A:\IVGA\CRT
FN+F12
FN+F2
setup screen
FN+F3 FN+F6
Ctrl+Alt+V
Shift-Ctrl-Alt-C
setup VGA/Conf.Simulscan setup VGA/Conf.Simulscan
FN-F12
FN-F5
F2/Choose Option/F5
setup menu
Shift-Ctrl-D
Key command to
deactivate port
Ctrl+Alt+Esc (for setup)
FN+D or Ctrl+D
Ctrl+FN+D
FN+F5
type from A:\IVGACRT
FN+F12
FN+F2
setup screen
FN+F3 F+-F6
Ctrl+Alt+V
Shift-Ctrl-Alt-L
FN-F12
FN-F5
F2/Choose Option/F5
setup menu
Shift-Ctrl-D
39