To set the white balance manually
1.
Touch the Menu (
"White Balance"
"Custom WB."
•
The "(
) Set White Balance"
indicator appears.
2.
Fill the screen with a white subject,
and then touch the (
•
The camcorder stores the white
balance setting.
3.
To exit the menu, touch the Exit (
The camcorder applies the stored white balance the next time
•
you record.
•
When setting the white balance manually, the subject must be white,
otherwise, your camcorder may not detect an appropriate setting
value.
•
The adjusted setting remains until you set the white balance again.
•
During normal outdoor recording, setting White Balance to "Auto"
may provide better results.
•
Cancel the digital zoom function for clear and precise white balance
setting.
page 63
•
Reset the white balance if light conditions change.
56
) tab
White Balance
Tungsten
Custom WB
2/2
) tab.
) or Return (
) tab.
Aperture
The camcorder adjusts the aperture (lens opening) automatically
depending on the subject and recording conditions. You can also
manually adjust the aperture.
Select the record mode by pressing the MODE button.
1.
Touch the Menu (
) tab
"Aperture."
2.
Touch the desired submenu item.
3.
To exit the menu, touch the Exit
(
) or Return (
) tab.
Submenu items
•
Auto: Sets the aperture value automatically.
•
Manual (
): Touch the decrease (
m
to adjust the aperture. You can choose from
the following settings:
F1.8, F2, F2.8, F4, F5.6, F8, F11, F16
Advanced recording
page 29
Aperture
Auto
Manual
m
1/1
) or increase (
) tab