Wireless Lan - Denon AVR-X2100W Owner's Manual

Contents Connections

Wireless LAN

When connecting to a wireless LAN network, stand the rod antenna for
wireless LAN/Bluetooth connection upright on the rear panel.
See "Wi-Fi Setup" (v p. 182) on how to connect to a wireless LAN
router.
Internet
Router with access point
DIGITAL AUDIO
NETWORK
1 2 1 2
TV CBL/
(ASSIGNABLE) AUDIO SAT CBL/ DVD
SAT
OPTICAL
AUDIO COMPONENT VIDEO
(ASSIGNABLE) ZONE2 SUBWOOFER (ASSIGNABLE)
Y P B /C B P R /C R
1
1 CBL/
CBL/
SAT
SAT
2
2
DVD
1 2
CBL/SAT DVD
3 VIDEO
PRE OUT (ASSIGNABLE)
Blu-ray
ANTENNA
4
CD
AM
SPEAKERS
.
Front panel Display
Playback
Modem
To WAN side
HDMI (ASSIGNABLE)
HDMI
3 4 5 6 7
Blu-ray GAME MEDIA AUX2 CD MONITOR1 MONITOR2
PLAYER
ARC
AC IN
IMPEDANCE : 4 16
Rear panel
Settings
0 When using this unit, we recommend you use a router equipped with the following
functions:
0 Built-in DHCP server
This function automatically assigns IP addresses on the LAN.
0 Built-in 100BASE-TX switch
When connecting multiple devices, we recommend a switching hub with a
speed of 100 Mbps or greater.
0 Only use a shielded STP or ScTP LAN cable (readily available at electronics
stores). (CAT-5 or greater recommended)
0 The normal shielded-type LAN cable is recommended.
If a flat-type cable or unshielded-type cable is used, other devices could be
affected by noise.
0 When using a router that supports the WPS （Wi-Fi Protected Setup） function, Wi-
Fi connection can be carried out easily.
0 When using this unit connected to a network with no DHCP function, configure the
IP address, etc. in "Network" (v p. 181).
NOTE
0 The types of routers that can be used depend on the ISP. Contact your ISP or a
computer shop for details.
0 This unit is not compatible with PPPoE. A PPPoE compatible router is required if
your contracted line is not set using PPPoE.
0 Do not connect an NETWORK connector directly to the LAN port / Ethernet
connector on your computer.
0 Various online services may be discontinued without prior notice.
51 Remote
Tips Appendix
Index