Connecting An Antenna - Meridian M80 User Manual

Connections
Second external

Connecting an antenna

• Connect up to two external antennas for the
radio to Antenna 1 or Antenna 2.
For more information see Connect an antenna ,
page 2.
Connecting to a television or
video display
• Connect the Video connector to a display with
a composite video input, such as a television.
• Connect the S-Video output to a display with
an S-Video input, such as a television or
monitor.
Antenna 2 Antenna 1 Video S-Video
Composite
antenna video display
External rod or S-Video
wire antenna display
Connecting headphones or
the optical output
To connect headphones
• Plug headphones (equipped with a 3.5mm mini
jack plug) into the Optical Out/Headphones
socket.
To connect to the digital output
• Connect the Optical Out/Headphones socket
to an optical input on a digital recorder or
digital surround processor, using a mini optical
cable.
Optical In Optical Out
220-240Vac
Aux 2 Aux 3 - Dock Voltage
Aux 1 ~
Headphone
External Headphones Voltage
analogue or digital label
source preamp
External i80 Dock
digital source
Connecting external sources
To connect an analogue source
• Connect the Aux 1 input to the line output of
an audio source, such as a music player, using
a mini stereo jack plug.
To connect a digital source
• Connect the Aux 2 input to the optical output
of a digital source, such as a digital music
player, using a mini optical cable.
To connect an MP3/WMA player
• Connect the Aux 1 or Aux 2 input to an MP3/
WMA player, using a suitable cable.
Power
Input
Power
cord
i80 iPod Dock
USB i80 dock
cable
For information about connecting the i80 iPod
Dock see Playing your iPod , page 12.
While connected the iPod battery is recharged
from the product.
The USB connector optionally allows you to
charge your iPod from an external USB power
supply or computer. The i80 light changes from
green to red when charging.