Control Panel; Control Panel Features - LG MFL62184434 Owner's Manual

Control Panel

* Depending on the model, some of the
following functions may not be available.

Control Panel Features

LED Display
Indicator
Ice Type Ice Type
Press the ice type button to choose either cubed
or crushed ice. The cube or crush ice icon will
illuminate on the LED display.
Refrigerator Temperature Refrigerator Temperature
Indicates the set target temperature of the
refrigerator compartment.
Freezer Temperature Freezer Temperature
Indicates the set target temperature of the
freezer compartment.
The actual inner temperature varies
depending on the food status, since the
indicated temperature setting is the target
temperature and not the actual temperature
within the refrigerator.
Initially set the REFRIGERATOR CONTROL
at 3 degrees C and the FREEZER CONTROL
at -17 degrees C.
Leave them at these setting for 24 hours
(one day) to stabilize. Then adjust the
compartment temperature as illustrated
above.
Pure N Fresh Pure N Fresh
The Pure N Fresh helps remove odors from
the refrigerator. The Pure N Fresh has two
settings, Auto and Power(PWR). In Auto
mode, the Pure N Fresh will cycle on and
off in increments of ten minutes on and
one hundred ten minutes off. If set to the
Power(PWR) mode, the Pure N Fresh will stay
on continuously for four hours, cycling on and
off in increments of ten minutes on and five
minutes off. After four hours, the Pure N Fresh
will switch back to Auto mode.
Control
Button
NOTE
[
Press the Pure N Fresh button once for
Power(PWR) mode.
Press the Pure N Fresh button again to
switch back to Auto mode.
HOW TO USE 23
( On some
]
models)