Rocker Switches - IBM PC 300GL Technical Information Manual

1 Microprocessor
2 DIMM 0
3 DIMM 1
4 Fan connector
5 Power connector
6 Switch/LED connector
7 RFID connector (some models)
8 Primary EIDE connector
9 Secondary EIDE connector
10 Diskette drive connector
11 Fan connector
12 Large rocker switch (some models)

Rocker switches

The two rocker switches on the system board are used for custom configuration. For
the location of the small and large rocker switches, see items 12 and 13 above.
The large rocker switch has eight switches for setting microprocessor speeds for
compatibility with the system board. The following table shows the rocker switch
settings for compatibility with the corresponding microprocessor speeds.
13 Small rocker switch
14 Battery
15 Chassis intrusion detection connector
16 Wake on LAN connector
17 Alert on LAN connector
18 CD-ROM, CD-RW, or DVD drive connector
19 PCI adapter slot 1
20 PCI adapter slot 2
21 PCI adapter slot 3 (for Alert on LAN adapter)
22 Chassis speaker connector
23 AGP adapter slot
Chapter 2. System board features
15