Driver Installation - Kinqdy RP-5N Series User Manual

Driver Installation

The RP-5N Series comes with an AutoRun CD-ROM that
contains all drivers and utilities that can help you to
install the driver automatically.
Insert the driver CD, the driver CD-title will auto start and
show the installation guide. If not, please follow the
sequence below to install the drivers.
Step 1 – Install Chipset Driver
1. Click on the STEP1-CHIPSET folder and select the
OS folder your system is
2. Double click on the .exe file located in each OS folder
3. Follow the instructions that the window shows
4. The system will help you install the driver
automatically
Step 2 – Install VGA Driver
1. Click on the STEP2-VGA folder and select the OS
folder your system is
2. Double click on the Setup.exe file located in each OS
folder
3. Follow the instructions that the window shows
4. The system will help you install the driver
automatically
Copyright © 2013 Kingdy Technology Inc. All Rights Reserved.
Step 3 –Install LAN Driver
1. Click on the STEP3-LAN folder and select the OS
folder your system is
2. Double click on the .exe file located in each OS folder
3. Follow the instructions that the window shows
4. The system will help you install the driver
automatically
Step 4 –Install Touch Driver (Optional)
1. Click on the STEP4-TOUCH (Option) folder and select
the OS folder your system is
2. Double click on the .exe located in each OS folder
3. Follow the instructions that the window shows
4. The system will help you install the driver
automatically
Step 5 –Install Rapid Storage Driver (Optional)
1. Click on the STEP5-RAPID S TORAGE (Option) folder
and double click on the setup.exe
2. Follow the instructions that the window shows
3. The system will help you install the driver
automatically
24 RP-5N Series