Table of Contents
Advertisement
BIOS Setup
PCI Subsystem Settings
This section is used to configure the PCI subsystem
settings.
Copyright © 2013 Kingdy Technology Inc. All Rights Reserved.
ACPI Power Management Configuration
This section is used to configure the ACPI Power
Management.
ACPI Sleep State
Selects the highest ACPI sleep state the system will
enter when the Suspend button is pressed.
S1(POS) Enables the Power On Suspend function.
S3(STR) Enables the Suspend to RAM function.
Resume by PME
Enable this field to use the PME signal to wake up the
system.
Wake system with fixed time
Enable or disable system wake on alarm event. When
enabled, system will wake on the hr::min::sec specified.
11
RP-5N Series
Advertisement
Table of Contents
