BMW MINI Owner's Manual page 36

Installing and folding up
1. Push out retaining pin 2 on one side until it
engages.
2. Insert wind deflector with retaining pins into
the openings 1 and 2 on that side of the
vehicle.
3. On the opposite side of the vehicle, insert
the retaining pin 1 into the opening, pushing
against the spring load.
4. Push out retaining pin 2 on one side until it
engages.
5. Fold up the upper part of the wind deflector.
If a seat is in its rearmost position, do not
recline the backrest too far; otherwise, the
wind deflector could be
Removing and folding
Remove the deflector following the reverse
sequence.
34
Online Edition for Part no. 01 40 2 605 657 - © 07/10 BMW AG Online Edition for Part no. 01 40 2 605 657 - © 07/10 BMW AG
damaged.<
Push the release lever toward the center of the
wind deflector and fold both halves together.