Summary of Contents for Pet Gear I-GO2 SPORT PG1210
Page 1
For The ON-THE-GO Pet ™ INSTRUCTION MANUAL I-GO2 SPORT PG1210 Carrier/Car Seat/Backpack/Roller Bag/Tote To see our full line of products, visit us online at: www.petgearinc.com CUSTOMER SERVICE HELP DESK customerservice@petgearinc.com Toll-Free 877-752-9123 - Eastern Standard Time 8am-3pm, Monday through Friday...
PARTS LIST Check that you have all the parts shown BEFORE assembling your product. If any parts are missing, call Customer Service. Tether and D-Ring. (This has been sewn into the interior of the unit.) I-GO2 Sport Carrying Strap Reinforcement Board- already installed in unit.
Page 3
ASSEMBLY Step 1. Push down on Reinforcement Board, i nsideoftheIGO2Sport,untilitisflat,asshown in Figure A. Step 2. Lift up the hook & loop fastener strips, so they are above the Reinforcement Board as shown in Figure A. You will need the hook & loop fastener strips to attach Fleece-Top Comfort Liner.
Page 4
TO USE WHEEL COVER To use wheel cover, unzip, pull out cover on the back of the I-GO2, and cover wheels (shown in Figure D). TO USE AS CAR SEAT Step 1. To use the Sport as a car seat, take seatbelt Step 2.
FOR PETS ONLY. Not intended to be used as a restraining device for aggressive or dangerous animals that dig, chew or paw aggressively. Do not leave your pet unattended. PET GEAR is not liable for any damage caused by aggressive, destructive,immatureoruntrainedanimals.Donotusenearanopenorexposedflame.Failuretofollowthese warnings and the instructions could result in serious injury or death.