Page 1
For The ON-THE-GO Pet ™ INSTRUCTION MANUAL I-GO2 TRAVELER PG1240 Carrier/Car Seat/Backpack/Roller Bag/Tote To see our full line of products, visit us online at: www.petgearinc.com CUSTOMER SERVICE HELP DESK customerservice@petgearinc.com Toll-Free 877-752-9123 - Eastern Standard Time 8am-3pm, Monday through Friday...
Check that you have all the parts shown BEFORE assembling your product. If any parts are missing, call Customer Service. Tether and D-Ring. (This has been sewn into the interior of the unit.) I-GO2 Traveler Carrying Strap Reinforcement Board Fleece-Top Comfort Liner with Hook & Loop Fasteners. I-GO2 TRAVELER • PG1240...
Page 3
Traveler at an angle, as shown in Figures B and C. strips so they are above the Reinforcement Board as shown in Figure D. You will need the hook & loop fastener strips to attach Fleece-Top Comfort Liner. See Step 6. I-GO2 TRAVELER • PG1240...
Page 4
Reinforcement Board until it lays flat inside of the I-GO2, as shown in Figure E. Step 6. Place Fleece-Top Comfort Liner inside the I-GO2 Traveler and fasten into place, using the two hook & loop fastener strips. See Figure F. TO ATTACH CARRY STRAP...
Page 5
Step 1. To use the Traveler as a car seat, take Step 2. Next attach carry strap around headrest and seatbelt and place it through the seatbelt straps and adjust to a secure position (shown in Figure J). buckle seatbelt to secure (shown in Figure I). I-GO2 TRAVELER • PG1240...
Not intended to be used as a restraining device for aggressive or dangerous animals that dig, chew or paw aggressively. Do not leave your pet unattended. PET GEAR is not liable for any damage caused by aggressive, destructive, immature or untrained animals. Do not use near an open or exposed flame. Failure to follow these warnings and the instructions could result in serious injury or death.