Suunto X6hr Instruction Manual page 28

3. Change the value of the field to either on or off with the arrow buttons and press
Suunto . The tones are now set.
Setting the icons
Icons are the symbols that appear for a moment when you change the mode. You can
either show or hide them.
To set the icons:
1. In the Function menu, scroll to General and press Suunto . The General menu is
displayed.
2. Scroll to Icons and press Suunto . The On/Off field is activated.
3. Change the value of the field to either on or off with the arrow buttons and press
Suunto . The icons are now set.
Setting the backlight
Light is the backlight of the Suunto X6
• Normal: The light goes on when you press Start for more than
2 seconds in any other mode than the Chrono mode. The light is on for 5 seconds
after the last press of any button.
NOTE: If the backlight setting is normal and you press Start in Chrono mode, the
Chrono is activated. If you want to use the light in the Chrono mode, you have to set
the backlight to Night Use.
• Off: The light does not go on from any button or during an alarm.
• Night Use: The light goes on when you press any of the buttons and stays on for 5
seconds after the last press of a button.
NOTE: The backlight goes on when an alarm sounds in Normal and Night Use.
NOTE: When the backlight is on, the heart rate reception is interrupted.
26
display. Light has three possible settings:
HR