Audio Out - Toshiba DR420KU Owner's Manual

;:,
....
...
o
a.
c:
n
~.
o
;:,
Your setting is activated.
ON : Outputs DTS signals.
If your amplifier / decoder is compatible with
DTS, set to "ON".
OFF : No DTS signal is output.
If your amplifier / decoder is NOT compatible
with DTS, set to "OFF".
Your setting will be activated.
PCM : Converts the Dolby Digital into PCM (2 channel).
When your amplifier/decoder is NOT
compatible with Dolby Digital, set to "PCM".
Stream : Outputs Dolby Digital signals.
When your amplifier/decoder is compatible
with Dolby Digital, set to "Stream".
lID
I
Settings for DTS (Default: ON)
Select a setting using
[.&
I
T], then press [ENTER].
[£]
Settings for Dolby Digital (Default: Stream)
Use
[.&
I
T] to select a setting, then press [ENTER].
Audio Out
Your setting will be activated.
GEl' ERAl SETTII\JG
Choose the appropriate audio setting for your external device.
It will only affect a disc playback.
Use
[.&
I T] to select a desired item, then press [ENTER].
001
Dynamic Range Control (Default: ON)
Set to "ON" to compress the range between soft and loud sounds.
Use
[.&
I T] to select a setting, then press [ENTER].
Note
• Dynamic range control function is available only on
I
the discs which are recorded in the Dolby Digital
I' "
format.
....
_--_.
__
........
"""' . ,,,..,........,------
[[II
Settings for PCM (Default: 48kHz)
I
Use
[.&
I
T] to select a setting, then press [ENTER].
Your setting will be activated.
48kHz : If your amplifier/decoder is NOT compatible
with 96kHz PCM, select "48kHz". 96kHz sound
will be output in 48kHz.
96kHz : If your amplifier/decoder is compatible with
96kHz PCM, select "96kHz". 96kHz sound will
be output.
-~~~;;]'
Note
When playing back disc with copyright protection
• Even if you select "96kHz", the sound will be down .
i
sampled at 48kHz.
I
. C::,
: ,0+-
r
::r
i
!~
I
VI
,
EN 85