Toshiba DR420KU Owner's Manual page 86

I\~ERAl
SETTING
Disc Menu Language (Default: English)
Set the language for disc menu.
Use [.. ,
T]
to select a language, then press [ENTER].
Your setting will be activated.
Audio Language (Default: Original)
Set the audio language.
Use [.. 'T] to select a language, then press [ENTER].
Your setting will be activated.
• When "Original" is selected, the audio language will be
in the disc's default language.
Subtitle Language (Default: OFF)
Set the subtitle language.
Use [.. ,
T]
to select a language, then press [ENTER].
Your setting will be activated.
If "Other" is selected for
[!]
to
[~J,
press 4-digit code
using [the Number buttons).
Code Input
DODD
• When you finish entering the code, press [ENTER].
Refer to the language code table on page 98.
r;;-'
I·
Only the languages supported by the disc can be.
I
selected.
,
• Audio language setting may not be available to
some discs.
t
·
You can also change or switch off the subtitles on a
DVD from the disc menu if it is available.
.
:=~:~~~~~:=':.2=w~~~::~~~".:=~ly.
86 EN
Angle Icon (Default: ON)
Set to "ON" to show the angle icon during the playback.
Use [.. ,
T]
to select a setting, then press [ENTER].
Your setting will be activated.
Still Mode (Default: Auto)
Select "Auto" usually.
Use [.. ,
T]
to select a setting, then press [ENTER].
Your setting will be activated.
Auto : Optimum resolution setting ("Field" or
"Frame") will be selected.
Field : Images in the still mode will be stabilized.
Frame : Images in the still mode will be highly defined.
.Note
• Frame is one completed video image made up of two
fields (There are 30 frames per second of NTSC. video).
. . . . . . . . ~ . R C M I I f m . . - ~
..........._ _
-.Il