LevelOne FCS-3054 Hardware User Manual page 9

1) Ethernet Port
The Ethernet port connects to a network using an Ethernet cable.
2) Reset Button
The Reset Button is used to restore the factory default settings of the camera, including
the administrator's password.
How to reset the camera?
While the power is on, press and hold the Reset Button for 5 seconds or until the Blue
LED lights up.
3) LED Indicators

Blue LED: The Power LED lights blue when the camera is powered on, the light
goes off once the initial boot up process is complete.

Amber LED: The Ethernet Activity LED blinks amber when network activity is in
progress.

Green LED: The Ethernet Link LED lights green when a network connection is
established.
4) Memory Card Slot
Insert a memory card (not included) into this slot for local recording.
NOTE: Supports microSDHC and microSDXC cards.
How to install the memory card?
Insert the memory card into the slot with the metal contacts facing down, and then push
the card until it clicks into place.
How to remove the memory card?
Access the Web Configurator to "safely unmount" the card (see the camera Firmware
Manual for details). Once unmounted from the firmware, push the card to eject it from the
slot.
Hardware Manual
9