Splitting Up Motion Pictures; Capturing Still Pictures From Motion Pictures - Panasonic Lumix DMC-TZ10 Operating Instructions Manual

Operating instructions for advanced features
Table of Contents

Advertisement

Capturing still pictures from motion pictures

Playback mode:
Save a scene from a motion picture as a still picture.
Display the picture that you want to capture as a still picture
by pausing a motion picture during playback
Capture still picture
Select [YES]
The picture size is 2M
. (Except for still pictures captured from motion pictures
where the [REC QUALITY] is [VGA] or [QVGA], when the size is 0.3M
The picture quality becomes slightly lower because of the picture quality setting of the
original motion picture.
114
This function is not available in the DMC-TZ9/DMC-TZ8.
VQT2R24
▲: Pause/playback
◄: Fast rewind (2 steps)
(during pause) single-frame rewind
►: Fast forward (2 steps)
(during pause) single-frame forward
A still picture is created.
.)

Splitting up motion pictures

Playback mode:
A single motion picture can be split into 2 parts. This is convenient when you want to keep
just the necessary scenes, or if you wish to delete unnecessary scenes to increase free
space on your card, such as when traveling.
Select [VIDEO DIVIDE] from [PLAYBACK] menu (→20)
Select the motion picture to split with ◄►, and then press
[MENU/SET]
Only the motion picture is displayed, and it is automatically played back.
Play back the motion picture and pause at the place to split
Decide the point to split the motion picture
Select [YES]
Use a sufficiently charged battery (→11) or AC adaptor (optional) and DC coupler
(optional).
When there is extremely little free space left on the card, it may not be possible to split
the motion picture.
The following motion pictures cannot be split.
Motion pictures set as [FAVORITE]
Motion pictures protected by [PROTECT]
Splits cannot be made that would leave a motion picture of less than 1 second after the
split.
Split points are set at time increments of 0.5 seconds. (There may be a slight difference
from the specified point)
Splitting may take some time.
During splitting, do not turn off the camera's power or remove the card or battery. If you
do so, the motion picture will be deleted.
[VIDEO DIVIDE] is not available in the DMC-TZ9/DMC-TZ8.
▲: Pause / playback
◄: Fast rewind (2 steps)
(during pause) single-frame rewind
►: Fast forward (2 steps)
(during pause) single-frame forward
The motion picture is split.
The original motion picture that was split does
not remain.
(There will only be the 2 motion pictures that were
left after the split.)
VQT2R24
115

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumix dmc-tz9Lumix dmc-tz8

Table of Contents