Using Windows Vista - D-Link DIR-601 User Manual

Section 5 - Connecting to a Wireless Network

Using Windows Vista

®
Windows Vista users may use the built-in wireless utility. If you are using another company's utility or Windows 2000, please refer to the user manual
® ®
of your wireless adapter for help with connecting to a wireless network. Most utilities will have a "site survey" option similar to the Windows Vista
®
utility as seen below.
If you receive the Wireless Networks Detected bubble, click on the center
of the bubble to access the utility.
or
Right-click on the wireless computer icon in your system tray (lower-right
corner next to the time). Select Connect to a network.
The utility will display any available wireless networks in your area. Click on a
network (displayed using the SSID) and click the Connect button.
If you get a good signal but cannot access the Internet, check you TCP/IP settings
for your wireless adapter. Refer to the Networking Basics section in this manual
for more information.
D-Link DIR-601 User Manual 85