Pptp - D-Link DIR-601 User Manual

Section 3 - Configuration
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username and password. This
option is typically used for DSL services.
My Internet
Select Dynamic IP (DHCP) to obtain IP Address information
Connection:
automatically from your ISP. Select this option if your ISP
does not give you any IP numbers to use. This option is
commonly used for Cable modem services.
Advanced Domain Name System (DNS) services enhances
Enabled
your Internet performance by getting you the information
Advanced
and web pages you are looking for faster and more reliably.
DNS
In addition, it improves your overall Internet experience
Service:
by correcting many common typo mistakes automatically,
taking you where you intended to go and saving you valuable
time.
Disclaimer: D-Link makes no warranty as to the availability,
reliability, functionality and operation of the Advanced DNS
service or its features.
Address
Select Static if your ISP assigned you the IP address, subnet
Mode:
mask, gateway, and DNS server addresses. In most cases,
select Dynamic.
Enter the IP address (Static PPTP only).
PPTP IP
Address:

PPTP

Enter the Primary and Secondary DNS Server Addresses
Subnet
(Static PPTP only).
Mask:
D-Link DIR-601 User Manual
PPTP
29