Changing Settings; Time Format; Troubleshooting - Kicker ZK150 Owner's Manual

Hide thumbs Also See for ZK150:
Table of Contents

Advertisement

CHANGING SETTINGS
Tap the setup button to enter setup mode. You can tap the setup button again to exit setup mode,
discarding any unsaved changes.
• Rotate the navigation knob to scroll through settings while in setup mode.
• Select a setting to edit by pressing the navigation knob.
• Edit the setting by rotating the navigation knob.
• Save the setting by pressing the navigation knob.
• Settings appear in the following order:
DISPLAY
Adjusts the display brightness.
SLEEP
Choose length of play time for the sleep timer from 5-120 minutes. The sleep timer is activated once
you save a value other than zero. Once activated, the sleep timer plays audio for the period of time you
selected then puts the ZK150 into standby.
TREBLE
Boost or cut treble.
BASS
Boost or cut bass.
TIME
Adjust the time with the navigation knob. Press the knob to save and advance to TIME FORMAT.
4
TIME FORMAT
Choose between 12-hour and 24-hour time formats.
TROUBLESHOOTING
No sound:
1. make sure the ZK150 is connected to a power outlet that is known to work.
2. make sure the ZK150 is turned on and not in standby (tap the navigation knob).
3. make sure the ZK150 is set to the proper audio source (see page 5).
4. try turning the navigation knob clockwise to increase volume.
5. if using the auxiliary input, make sure the connected device is playing and turned up.
6. try re-docking your Zune device.
7. the ZK150 may be muted; try tapping the SNOOZE button.
8. try unplugging/re-plugging the power.
No radio reception:
1. make sure the proper radio region is selected (see page 6).
2. connect an antenna and try different angles, positions, and placements within your home/building.
No display/Dim display:
1. make sure the ZK150 is connected to a power outlet.
2. make sure the ZK150 is turned on and not in standby (tap the navigation knob).
3. increase the display brightness (see previous section),
4. try unplugging/re-plugging the power.
The DOCK icon flashes continuously: This means your Zune device has failed to authenticate.
Remove your Zune device, wait 5 seconds, then re-dock your Zune device.
7

Advertisement

Table of Contents
loading

Table of Contents