Before First Use; Vacuum Sealing With Bags - Breville Fresh Keeper BVP700 Instruction Booklet

PAGE HEAdER..... OPERATING yOUR BREVILLE FRESH KEEPER™

BEFORE FIRST USE

Before using your vacuum sealer for the first
time, remove any packaging material and
promotional labels. Ensure the appliance
is switched off at the power outlet and
the power cord is unplugged. Wash the
removable drip tray in warm, soapy water
with a soft cloth. Rinse and dry thoroughly.
Wipe the vacuum sealer unit with a soft
damp cloth. Do not place parts in the
dishwasher.
USING yOUR
BREVILLE FRESH KEEPER™

VACUUM SEALING WITH BAGS

1. Place the vacuum sealer on a flat dry
surface. Plug the power plug into a
230/240V power outlet and press the
power button on the back of the vacuum
sealer to turn the unit on. The LED light
will be white to indicate that the unit is
on and ready.
2. Press the release buttons on both sides
of the vacuum sealer to open the lid.
The lid should open to a 90 degree
angle. Ensure that the drip tray is placed
correctly in position.
3. Using a vacuum sealer 20cm bag,
place the item inside that needs to be
vacuumed.
4. Place the end of the bag across the
sealing strip and up to the 2 white tabs
in the drip tray.
Close the lid, press and hold pressure on
the middle of the lid to start the vacuum
sealing. The LED light should turn blue
to indicate that the vacuum sealer is
under vacuum.
The LED light will turn red to indicate
that it is sealing. When red light starts
to flash this is an indication the vacuum
sealer is finished vacuuming and sealing.
To remove bag press the 2 release
buttons on either side of the fresh keeper
and remove bag.
9