Kustom airplay AP15A-Active Owner's Manual page 6

Combination Input Jack (1)
This jack is used to connect any audio source to the mixer, such as microphones, guitars, keyboards,
drum machines, CD players, etc. This mono jack will accept either 1/4" (balanced or unbalanced)
plugs or XLR-type plugs.
Pad Switch (2)
This switch will lower the input gain by 16 db when depressed. It is used to prevent this channel from
distorting when using a line level input.
Channel One Volume (3)
This control is used to adjust the output for channel one. This control will only affect the output level
for the Combination Input Jack (1).
Line Input Jack(4)
This is a 1/4" balanced/unbalanced line level input that can be used for connecting a mixer, or other
line level instrument, to the speaker system.
Channel Two Volume (5)
This control will adjust the output level for channel two. This control will only affect the output level for
the Line Input (4).
Mic In Jack (6)
This jack can be used to connect a microphone that has a 1/8" plug such as a computer microphone.
This jack has phantom power for microphones that require it.
Channel Three Volume (7)
This control will adjust the output level for the Mic In Jack (6), the Aux Line In Jack (9), and the RCA
Input Jacks (8).
RCA Input Jacks (8)
These jacks are used to connect any audio device that uses the RCA-type plugs. Note: There are
left and right inputs which are automatically mixed to a mono output.
Aux Line In Jack (9)
This jack accepts a stereo (tip/ring/sleve) 1/8" plug. This should be used to connect a device with a
line level output such as a CD player or computer.
Treble Control (0)
This control is used to adjust the amount of high frequencies applied to the overall output of the
speaker system.
Mid Control (A)
This control is used to adjust the amount of mid frequencies applied to the overall output of the
speaker system.
Bass Control (B)
This control is used to adjust the amount of low frequencies applied to the overall output of the
speaker system.
Power Switch (C)
This switch is used to apply AC power to the speaker system.
AC Input Jack (D)
This jack is used to connect AC power to the Airplay AP15A speaker system.
About the Control Panel
6