Installing The Battery - Samsung Galaxy Note II User Manual

Micro SD card
To remove the microSD Memory Card:
1. Remove the battery cover.
2. Firmly press the card into the slot and release it. The
card should pop partially out of the slot.
3. Remove the card from the slot.
4. Replace the battery cover.

Installing the Battery

Before using your device for the first time, install the battery
and charge it fully.
Important! Before removing or replacing the battery cover,
make sure the device is switched off. To turn the
device off, hold down the
power-off image displays, then tap Power off.
To install the battery:
1. Slide the battery into the compartment (1) so that the
tabs on the end align with the slots at the bottom of the
phone, making sure the connectors align.
2. Gently press down to secure the battery (2).
key until the
Installing Battery
Getting Started 12