Assembly - Bissell PROheat All-Rounder User Manual

A
ssembly
Your PROheat All-Rounder is easy to assemble and
requires no tools:
.
1 Attach hose to Quick Release™ Hose Door
by inserting fitted end and turning clockwise
until you hear it click into the locked position.
.
2 Attach hose solution line to unit by inserting
fitted end into the machine. Turn clockwise
until it snaps into place.
.
3 Snap the two wand pieces together by
lining up tabs with holes and clicking
together. Be sure that the wand piece with
the adaptor (see figure 4) is the one you will
attach the tool to. Attach assembled wand to
grip using the same technique.
.
4 Snap the desired tool on the end of the wand.
Place wand adaptor into the wand caddy on
the side of the unit.
.
5 Place either tool caddy or solution tank (if
wet clean mode is desired) onto the back of
the machine.
6
w w w . b i s s e l l . c o m
WARNING:
Do not plug in your
cleaner until you have
completely assembled it per
the following instructions
and are familiar with all
instructions and operating
procedures.
1
3
4
Wand Adaptor
Wand Caddy
2
4
5