Canceling The Automatic Close/Open Mode - Pioneer AVX-P7300CD Owner's Manual

Operation of the Display

Canceling the Automatic Close/Open Mode

To prevent the display from hitting the shift lever of an automatic vehicle when it is in the
"P" (park) position, or when you do not wish opening/closing of the display to be carried
out automatically, please cancel the automatic close/open mode.
1. Turn the ignition switch OFF.
2. While pressing the OPEN/CLOSE button, turn the ignition switch ON (or to
ACC).
The automatic close/open mode will be canceled.
Repeat the preceding operation to turn the automatic close/open mode on.
Note:
• This procedure can also be used to cancel the automatic close/open mode when the display is in the
open position.
• The automatic close/open mode can also be canceled by pressing the OPEN/CLOSE button while
attaching the front panel.
• When the ignition switch was turned OFF after the display was closed, the display will not open
when the ignition switch is turned ON (or turned to ACC), regardless of whether the automatic
close/open mode has been canceled or not. To deploy the display, press the OPEN/CLOSE button.
9