Advertisement
Tank241P / Tank201P - Description
A Tank241P - Tank201P: 1" shielded compression driver with
1.4" voice coil, loaded by a 80° x 60° horn.
B Tank241P: two 12", custom built, woofers with super-vented
neodymium magnets (in order to minimize the power compression
effect) and long excursion 2.5" voice-coils, in a symmetrical
(D'Appolito) configuration.
Tank201P: two 10", custom built, woofers with super-vented
neodymium magnets (in order to minimize the power compression
effect) and long excursion 2.5" voice-coils, in a symmetrical
(D'Appolito) configuration.
Tank241P / Tank201P - Connections panel
LINK
2
min 8 Ohm
1
8
ENGLISH
C
E
F
A
B G
D
IN
8 Ohm
H
F
LINK
IN
min 8 Ohm
8 Ohm
C The cabinets, characterized by an essential and rigorous style,
are built from 15mm birch multiply and finished with a special
anti-abrasion paint.
D Steel protection grille.
E
Tuning ports.
F
Transport handles.
G
Connection panel.
H Speaker stand adaptor.
Construction and components conform to the highest professional
standards for maximum reliability.
Connections are the same for both models.
1 - Input connector (Speakon®).
Connect it to the power amplifier or to the powered mixer output.
See connection examples on pages 25, 26, 27 and 28.
2 - Input LINK connector (Speakon®). It is wired in parallel to the in-
put connector and it makes possible to send the input signal to other
equipment (usually to another speaker system).
Always pay attention to the total impedance.
See connection examples on pages 25, 26, 27 and 28.
Never connect two power amplifiers to the same
speaker system: doing this may result in serious damage
to the amplifiers.
BOTTOM VIEW
D
®
The trademark Neutrik Speakon
is property of Neutrik
Advertisement
