Bosch Washing machine Instruction Manual page 6

Removing the transport securing devices
Before the machine is used for the first time, all transport securing devices from
the back of the appliance must be removed and stored for any later transport
(i.e., relocation).
1 Remove the machine from the transport
base. Remove wedge
2 Remove the 4 screws
(Figure 2.1 ).
3 Remove transport securing device
Remove both screws
a number 10 or 13 spanner (depending upon
the model).
Figure 1
A
(Figure 1 ).
with a screwdriver
(Figure 2.2 ) using
Check to see that both plastic inserts on
the connecting carrier have also been
removed.
Reinstall screws
4 Both holes must be covered with the
caps provided
package) ( Figure 2.3 )!
Figure 2.1
Figure 2.2
13
Figure 2.3
6
in their original positions.
(found in the accessories
2
1
2
1