Setup Menu - Hitachi CP-X8150 User Manual

SETUP menu

From the SETUP menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or ENTER button to
execute the item. Then perform it according to the
following table.
Item
AUTO KEYSTONE
KEYSTONE
(continued on next page)
Selecting this item performs the Automatic keystone distortion
correction. Projector automatically corrects vertical keystone
distortion due to the (forward/backward) setup angle by itself.
This function will be executed only once when selected in the menu.
When the slant of the projector is changed, execute this function again.
• The adjustable range of this function will vary among inputs. For
some input, this function may not work well.
• When the projector is in one of the following conditions, the
automatic vertical keystone correction feature may not work
correctly or at all.
- REAR / CEILING or FRONT / CEILING is selected for the
INSTALLATION item in the SETUP menu, and the projector screen
is slanted or tilted downwards.
- The ZOOM adjustment is not set to the full WIDE (wide-angle
focus).
- The projector is nearly horizontal (about ±4°).
- The projector is inclined at about ±35 degrees or over.
• When the vertical lens shift is not set fully upward, this function
may not work well.
• This function is unavailable when the TRANSITION DETECTOR
(83) is ON or the screen is adjusted by PERFECT FIT (29, 30).
Using the ◄/► buttons corrects the vertical keystone distortion.
Shrink the bottom of the image ó Shrink the top of the image
• The adjustable range of this function will vary among inputs. For
some input, this function may not work well.
• When the zoom adjustment is set to the TELE (telephoto focus),
this function may be excessive. This function should be used when
the zoom adjustment is set to the full WIDE (wide-angle focus)
whenever possible.
• When the vertical lens shift is not set fully upward, this function
may not work well
• This function is unavailable when the TRANSITION DETECTOR
(83) is ON or the screen is adjusted by PERFECT FIT (29, 30).
Description
SETUP menu
47