Download Print this page
Hitachi CP-WX8240 User Manual
Hide thumbs Also See for CP-WX8240:

Advertisement

Quick Links

Projector
CP-X8150/CP-WX8240
User's Manual (detailed)
Operating Guide – Drawing function
Drawing function

Main Functions

Drawing function enables you to draw on the projector's screen with USB mouse
or tablets connected to the USB TYPE A ports.
ü Drawing on projected images
You can draw pictures or text on images projected by our projectors.
NOTE
• Authorization by the copyright owner(s) is required pursuant to
including visual images, if such works are copyrighted works.
• This drawing function may not work depending on the image signal.
ü Saving and displaying drawn images
You can save images with pictures or text drawn on them to a USB memory
device and then retrieve the saved images and display them again later.
NOTE
• A USB memory device is necessary to use this function. In addition,
if your projector only has one available USB TYPE A port, you will also need a
USB hub.
• Copyright protected images cannot be saved.
ü Use as a simple mouse
The Hitachi Pen tablet / USB mouse can be used as a simple mouse of a
computer connected to a projector.
NOTE
• To use this function, a USB cable is required to connect the computer
and the projector.
• Some Hitachi Pen tablets and USB mouse devices may not operate properly.
1

Advertisement

loading

Summary of Contents for Hitachi CP-WX8240

  • Page 1: Main Functions

    USB hub. • Copyright protected images cannot be saved. ü Use as a simple mouse The Hitachi Pen tablet / USB mouse can be used as a simple mouse of a computer connected to a projector. NOTE • To use this function, a USB cable is required to connect the computer and the projector.
  • Page 2 Connecting the Computer and Projector with a USB Cable In order to use the Hitachi Pen tablet / USB mouse in place of the computer’s mouse, connect the USB TYPE B port of the projector with a USB (A) port of the computer with a USB cable.
  • Page 3: Using The Drawing Function

    • The drawing function does not support drawing on images from the LAN port or the USB TYPE B port of the projector. If you operate the Hitachi Pen tablet / USB mouse while these images are displayed, the input source may automatically switch to USB TYPE A port.
  • Page 4 Drawing function Using the Drawing Function (continued) 4. Eraser Switches the electronic pen function to that of an eraser and specifies its size. The cursor turns into an Eraser ; dragging it erases previously drawn lines. Specifies a 12-dot Eraser. Specifies a 20-dot Eraser.
  • Page 5 Drawing function Using the Drawing Function (continued) Projector Temporarily blanks out the display. Operation Touching anywhere in the tablet’s operation area recovers the (continued) display. Toggles between display/hide the Pattern (grid lines). Cycles through the display source signals. • It can be used in the same way as the INPUT button on the projector’s control panel.

This manual is also suitable for:

Cp-x8150