Panasonic Diga DMR-EZ28 Operating Instructions Manual page 55

[Off] Audio is output from an amplifier when using the
DIGITAL AUDIO OUT terminal
(-+
60).
{).A,
T to select "Full" or "Normal",
then~
o
.A,
T to select "On" or "Off", then
~
)
o
.A,
T to select "Standard" or
"Enhanced", then
~
[Full] Video output is enlarged to match the screen
size.
[Normal] Video is output as 4:3 aspect. Side panels
(black bars on the left and right) will appear
on the screen.
Effective when connected to a device that only
supports RGB output.
After selecting "Functions of HOMI" (-+ 54, step 3)
o
.A,
T to select "HDMI RGB Output
Range", then
~
( HDMI RGB Output Range*
[Enhanced] When the black and white images are not
distinct.
( HDMI Audio Output )
- - . '
-----------
After selecting "Functions of HOMI"
(-+
54, step 3)
o
.A,
T to select "HDMI Audio Output",
then~
o
.A,
T to select "On" or "Off", then
~
( VIERA Link* )
After selecting "Functions of HOMI" (-+ 54, step 3)
O.A,
T to select "VIERA Link", then
~
(24p Output for DVD-Video* )
Can be set when you make the HOMI connection with
a TV supporting 24p
When this unit is connected to a TV supporting
1080/24p output via an HOMI cable, this unit displays
each frame at 1/24 second intervals - the same interval
originally shot with the film camera.
After selecting "Functions of HOMI" (-+ 54, step 3)
o
.A,
T to select "24p Output for DVD-
Video", then
~
[480i]
[480p]
[720p]
[1080i]
[1080p] When setting video output to "1 080p", we
recommend using a Panasonic HIGH SPEED
HOMI cable to prevent video distortion.
o
.A,
T to select the item, then
~
[Auto] Automatically selects the output resolution
best suited to the connected television
(1080p, 1080i, 720p or 480p).
(HDMI Resolution* )
You can only select items compatible with the connected
equipment. This setting normally does not need to be
changed. However if you are concerned about output
picture quality, it may be improved by changing the setting.
• To enjoy High Quality Video up-converted to 1080p, you
need to connect the unit directly to a 1080p-compatible
HOTV. If this unit is connected to an HOTV through
other equipment, it must also be 1080p compatible.
After selecting "Functions of HOMI" (-+ 54, step 3)
o
.A,
T to select "HDMI Resolution",
then~
(0 ....
'f'
to select "On" or "Off", then
~
[On] Set to "On" and then set "Progressive/24p"
in the Video Menu in the On-Screen Menu
(-+ 43) to "24p". When the video is being
output in 24 frames per second, no video is
output from a video terminal other than the
HOMI terminal.
(HDMI Output Display Aspect* )
Settings used when 4:3 aspect video is output on the
television as 16:9 aspect.
After selecting "Functions of HOMI" (-+ 54, step 3)
o
.A,
T to select "HDMI Output Display
Aspect", then
~
[On] When "On" is selected, you can operate other
"HOAVI Control" compatible devices using
"HOAVI Control",
@
Notes
Depending on the equipment to connect, some items may
be shaded in gray on the display and cannot be selected, or
changing settings may be unavailable.
* Above items can be set when you set "HDMI Priority" to "On".
f::'\
~
RQT9046