Supported Networks - K-Byte Zipit Getting Started Manual And Users Manual

_________________________________________________________________________
Open Network
SSID broadcast Yes
Zipit Wireless Messenger will automatically connect and the Setup Wizard will
Encrypted No
advance to the next step.
DHCP enabled Yes
Encrypted Network
The Setup Wizard will ask you to enter your WEP key. After entering the
correct key, Zipit Wireless Messenger will connect to the network and the Setup
SSID broadcast
Yes
Wizard will advance to the next step. The WEP key can typically be obtained
Encrypted
Yes
from your Access Point's setup or configuration screens.
DHCP enabled
Yes
If no other networks are found, a screen will be provided asking you to move to
Hidden Network
a new location or to enter the SSID. Also, if other networks exist, press NEXT
while the device is scanning for networks to advance to a manual configuration
SSID broadcast
No
screen that allows you to enter an SSID. After entering the correct SSID, Zipit
Encrypted
No
Wireless Messenger will connect to the network and the Setup Wizard will
DHCP enabled
Yes
advance to the next step.
Hidden & Encrypted
Network
This scenario is the same as the one described above, except after entering the
correct SSID, Zipit Wireless Messenger will ask you to enter your WEP key.
SSID broadcast
No
After entering the correct key, Zipit Wireless Messenger will connect to the
Encrypted
Yes
network and the Setup Wizard will advance to the next step.
DHCP enabled
Yes
If DHCP is not enabled, you will get a DHCP error when you try to connect to
Static IP Network
the network (unless the device successfully connects to another network) and
will be provided with a manual configuration screen where you must enter an IP
DHCP enabled
No
Address, Netmask, Gateway, and DNS. The correct values can typically be
obtained from your Access Point's setup or configuration screens.

SUPPORTED NETWORKS

19