Page 8 3. If you suspect a bulb is blown, check the bulb filament. If filament is coiled and VEC280 unbroken, the bulb is not blown. If filament is blown, replace bulb. 4. If you suspect the main fuse is blown, check it and, if necessary, replace with a new 20 amp spade fuse.
For disposal questions, call toll-free (877) 288-7722. This Vector Manufacturing product is warranted, to the original purchaser only, to be free of defects in materials and workmanship for one year from the date of purchase without additional charge. The Spotlight Safety warranty does not extend to subsequent purchasers or users.
Page 3
Specifications ..........8 INTRODUCTION Congratulations on purchasing the VEC280 Rechargeable Inflator/ Spotlight . This unit features a powerful quartz halogen Spotlight, long lasting, 2-LED Area Light, High Pressure/High Volume Inflator Combo and 12 Volt DC Portable Power Supply.
VEC280_Manual_110405 11/4/05 12:09 PM Page 2 Overview Viewing Battery Charge Status CONTROL PANEL Press the Battery Charge Level pushbutton to display battery status. The Battery LED AREA LIGHT (SEE DETAILED BACKLIT AIR Charge Level Indicator LEDs will light. ON/OFF PUSHBUTTON VIEW BELOW) PRESSURE GAUGE LEDs (from left to right):...
VEC280_Manual_110405 11/4/05 12:09 PM Page 4 USING THE 2-LED AREA LIGHT Inflating Products Without a Valve Stem Using the Compressor Inflation of other items requires use of one of the adapters (nozzles). The 2-LED Area Light is operated by the LED Area Light ON/OFF Pushbutton located to the right of the Area Light on the front of 1.
Replacement Parts Do not expose battery to fire or intense heat, as it may explode. The quartz halogen bulb and sealed lead acid batteries are available through Vector Manufacturing. A comparable (12 volt H3, 25 watt) bulb may be substituted. These DC Plug Fuse Replacement can also be purchased from popular automotive parts suppliers nationwide.
Need help?
Do you have a question about the VEC280 and is the answer not in the manual?
Questions and answers