Table of Contents
Advertisement
Adaptation
To adapt the system to your voice:
1.
Press
and touch
Main
Note:
This can also be reached from
Action
.
2.
From the "Say a Command" page, touch
Adaptation > Adapt Voice > Start
3.
Hold the phone so that the microphone is approximately six
inches away from your mouth and you can clearly read the
onscreen number sequences.
4.
Repeat either the digits or words shown onscreen using a
normal tone of voice.
If the phone cannot recognize your words, it will continue to
display the same information onscreen.
5.
Repeat the previous step for the remaining sets of digits or
words.
6.
When you are finished with a full session, you will reach a
screen that reads, "
Adapting
7.
Touch
to save.
OK
(
Main
)
> Voice Command.
Main > Settings > Speech to
Settings >
.
."
Note:
It is recommended that you perform the complete Adapt
Voice session at least once to achieve the maximum benefit
of this feature. If a partial adaptation is performed, you can
always return later and resume the process from the halfway
point.
To reset the adaptation:
1.
Press
and touch
Main
– or –
Press and hold
.
2.
From the "Say a Command" page, touch
Adaptation > Reset Voice
dialog.)
3.
Touch
to reset the voice recognition parameters or
Yes
exit.
Main
(
)
> Voice Command.
Settings >
. (The phone displays a reset voice
2F. Voice Services
to
No
77
Advertisement
Table of Contents
