Fujitsu ESPRIMO P15 Series Operating Manual page 39

Do not throw away the slot cover. For cooling, protection against fire and in order to
comply with EMC regulations, you must refit the slot cover if you remove the board.
► Push the board into the slot (1).
► Tighten the screw on the slot cover (2).
► Secure the cover plate on the casing again.
► If necessary, connect the cables to the board.
► Close the casing (see
If you have installed or removed a board, please check the relevant PCI
slot settings in the BIOS Setup. If necessary, change the settings. Further
information is provided in the PCI board documentation.
Fujitsu Technology Solutions
2
1
"Closing the casing", Page 33).
System expansions
35